The RoTechBooster ensures abundant, reliable, and consistent seal gas flow, through fluctuating operating conditions; thus, clean and dry gas is supplied to the gas seal in every situation.
The "Dock Sud“ combined power cycle plant in Buenos Aires, Argentina, is designed to adjust the power generation to the fluctuating electrical demand throughout all seasons. Managing the high demand during the summer months is particularly challenging, and the requirements for system component reliability are correspondingly high.
The power plant uses diesel engines and gas turbines to drive the generators. The diesel-driven generators run on a regular basis. The gas turbines are operated in start/stop mode so that they can respond quickly to high energy requirements or cope with peak loads.
As a low-pressure gas supply for the plant was only available to use for the gas turbines, a MAN Diesel & Turbo four-stage geared compressor with dry gas seals provided the means to increase gas pressure to the appropriate level for them. There is one geared compressor for each of the two gas turbines on site. Another geared compressor is used as back-up. Due to the nature of the operation, the turbines stop and start frequently placing the geared compressors in a pressurized stand-by mode when electrical demand drops.
Espey chamber seals have a modular design which means the seals can be composed using standard parts to meet individual application requirements. Espey chamber seals work with a very small operation gap between shaft and seal ring – leading to very low leakage – and are designed for dry-running and compensate radial and axial shaft deflections. Another advantage is that no sealing components which could generate additional shaft vibrations are actually fitted on the shaft. The seal rings are axially spring-loaded to prevent swinging up at pressure-less machine operation.
Espey chamber seals are applied in several turbo machines: integral gear, screw and chiller compressors, steam turbines, and shut-off valves for power plants. The main industries in which it is implemented are oil and gas, refining, chemical and petrochemical industry, power plants, and plants for iron and steel production. A further industry field with several references and successes is carbon dioxide
DiamondFace is an innovative microcrystalline diamond coating for mechanical seals. It is extremely hard and offers high wear protection, excellent heat conductivity, maximum chemical resistance and low friction. The coating adhesion also exceeds all known practical requirements. This increases the service life of mechanical seals several times over, the maintenance intervals are extended accordingly and the life cycle costs are greatly reduced.
The diamond thin-layer technology was developed in 2007 by EagleBurgmann together with the Fraunhofer Institute for Surface Engineering and Thin Films (IST), the Fraunhofer Institute for Ceramic Technologies and Systems (IKTS), Fraunhofer Institute for Mechanics of Materials (IWM), the Condias GmbH, and the Forschungszentrum Jülich. EagleBurgmann has established DiamondFace for mechanical seals as a series-produced product - the very first on the market.
The technology behind it is a microcrystalline diamond layer up to 15 μm thick which is applied to the seal face under vacuum at temperatures of 2,000 °C (3,632 °F) by chemical vapor deposition (CVD). The properties of this diamond layer are where you benefit. Primarily from its extreme hardness and robustness.
Increased Service Life of Mechanical Seals
Mechanical seals are a factor that has a decisive effect on the cost-effectiveness of your operation because their wear determines the productivity of the entire system, whether it is a pump, agitator or compressor. What causes damage to the seal faces? One reason is dry running which is often unavoidable due to insufficient lubrication or when gas-lubricated seal faces get in contact. The resulting temperature rise causes the seal to wear. And ultimately results in system downtimes.
EagleBurgmann has solved this problem which directly affects the success of your plant. Thanks to DiamondFace, the service life of mechanical seals is increased several times over, the maintenance intervals are extended accordingly and the life cycle costs are greatly reduced. The advantages for the operator are clear:
A sealing system, consisting of a mechanical seal and an associated supply system that is balanced by individual applications, is the utmost guarantee for a reliable sealing point and uninterrupted pump service. The performance of the seal is greatly influenced by the environment around the seal faces, making the provision of suitable, clean fluids as well as a moderate temperature an essential topic.
This guiding booklet provides a condensed overview of all piping plans established by the API 682 4th edition guidelines. Each illustrated piping plan is briefly described, and a recommendation that considers the media characteristics in terms of the relevant application and corresponding configurations is given to help you reliably select your sealing system. Furthermore, the content of this booklet has been enriched by providing clues – so-called ‘remarks and checkpoints’ – where EagleBurgmann
Waste paper treatment is of great significance in the paper industry. The collected and sorted waste paper is fiberized in pulpers using large amounts of water with the addition of chemicals and is sorted into slightly and heavily contaminated fractions.
In the de-inking process, the printing ink is removed by means of chemicals and mechanical forces and is skimmed as foam from the surface in the subsequent flotation.
The risk of dry running for the mechanical seal is especially great for the machines used in the flotation process. The seals in the coarse screening are subjected to intense stress due to the contaminations inclined to plaiting. Know-how and experience in the selection of seals and materials are requirements in order to ensure optimal and trouble-free operation.
The shafts of bleaching agent pumps, MC pumps, dispersers, slurry pumps, sorters, pulpers
With the latest generation of pump seals, eMG1 and eMG, EagleBurgmann has launched a further development of the million-fold proven MG1 on the market which can be used to seal, among other things, chemical pumps, water and waste water pumps, circulating pumps, and submersible motor pumps in numerous industrial sectors.
The eMG1 is 100 % compatible with the well-known MG1 standard seal. It has been innovated in detail and functionally expanded. The optimized geometry of this elastomer bellows seal was tested in long-term applications on EagleBurgmann
The environmental performance of products and processes in all industrial sectors increasingly is cause for critical inspection, with sustainability, conservation of natural resources, and reduced environmental contamination concerns influencing equipment design and selection.
Many industrial processes can be addressed to improve sustainability and minimize environmental impact, while at the same time maintaining or reducing operating costs. Implementing energy-efficient and environmentally friendly processes and technologies should be embraced as a priority at the component, process, and system levels.
One aspect of these processes is mission-critical rotating equipment, and specifically centrifugal pumps, which represent a significant proportion of the equipment found in industrial operations. One vital component of a centrifugal pump is the seal around the rotating shaft that passes through a stationary pressure casing or housing. The seal contains the liquid or gas from escaping to the environment.
Sealing systems help maintain acceptable pump efficiency, reliability, energy consumption, water usage, and emissions control. These factors can materially facilitate achieving total-life cycle cost-reduction and sustainability objectives. Sealing performance can be improved for centrifugal pump applications by upgrading from traditional compression packing to mechanical seal technology.
When sealing a centrifugal pump, the objective is to allow the rotating shaft to enter the wet area of the pump without large volumes of pressurized fluid escaping. The pump discharge pressure forces the fluid back behind the impeller, where it is induced to exit by way of the rotating drive shaft. To minimize leakage, a seal is needed between the shaft and pump housing to contain the pressure of the process being pumped and withstand friction caused by shaft rotation.
Compression packing is the traditional means to seal centrifugal pumps, going back more than 100 years. Also referred to as gland packing, it is a braided, rope-like, and lubricated material packed around the shaft in rings, physically stuffing the gap between the shaft and the pump housing, within a stuffing box.
For compression packing to work, some leakage must be maintained to lubricate and cool the packing material. Therefore, packing rings allow for an adjustable, close-clearance leak path parallel to the shaft axis. As the packing is used, however, some of the lubricant that is embedded into the packing is lost, reducing the packing ring’s volume. The pressure squeezing the rings together is also reduced, increasing leakage.
Periodic adjustment of the packing follower brings the pressure back into specification and controls the excess leakage. In today’s world, however, this maintenance is not always being done at required intervals or adjusted correctly. As the number of centrifugal pumps incorporating the use of compression packing decreases, training for and understanding of packing maintenance has waned.
Consequently, under-tightening and over-tightening of packing rings is a prevalent and growing misapplication of centrifugal pump maintenance, with critical consequences to both water consumption and energy draw.
Under-tightening results in too much leakage. Already, when properly adjusted, packing leakage can amount to gallons of liquid leaked per minute. This can be either aqueous solutions comprised of varied benign or caustic chemical compositions, or particles in suspension or slurry, depending on the process.
The heavier the suspension or slurry content in the pumped liquid, the more water is needed to get packing to work reliably. Typically, a clean external flush is piped into the stuffing box through a lantern ring, which keeps the packing lubricated and cool while flushing abrasives and chemicals.
Normally, some portion of the leakage is released continually into the atmosphere. Under-tightening of the packing rings and use of external flushes increase this atmospheric release proportionately, along with environmental impact potential.
A well-known Canadian operator of an oil pipeline commissioned EagleBurgmann to develop a sealing solution for crude oil pumps. The requirement: It needed to be a single seal that was just as safe as a double seal with buffer pressure system. In addition, the sealing solution was not to be designed for only one pump type but should be installed in various pumps of one station.
The operating parameters were quite extensive: The seal needed to be suitable for a pressure range from 2.5 bar (36 PSI) to 99 bar (1,436 PSI) as well as for shaft diameters from 115 mm to 155 mm (4.53’’ to 6.10’’). Since the pump stations are operated unmanned, the seal must operate without
Cumene, the common name for isopropylbenzene, is an aromatic hydrocarbon and a colorless liquid under atmospheric conditions with a characteristic smell. It is a component of crude oil and refined fuels and is mainly used in the production of phenol.
Ineos in Gladbeck and Degussa in Marl, both located in Germany, are supplied with cumene by a pipeline. The pump station for this pipeline is situated inside the chemical industry park in Marl and is operated by Degussa Infracor. Cumene is classified as hazardous to the environment, so the “TA-Luft” directive (German Clean Air Directive) has to be considered for any sealing solution.
Originally, the pump was equipped with a Flowserve mechanical seal type EUROPAC 613/663 in tandem arrangement. With
Gallagher Fluid Seals, Inc. has exciting news for its customers. EagleBurgmann, a leading provider of industrial sealing technology, has awarded Gallagher Fluid Seals with exclusive distribution rights in the Northeast and Mid-Atlantic territory of the United States. The territory includes Maine, Vermont, Massachusetts, Connecticut, New Hampshire, Rhode Island, New York, New Jersey, Pennsylvania, Delaware, Maryland, Washington D.C., and Virginia.
2019