Tag Archives: flowmeter

Elastomer Seals for Instrumentation: In-Line Process

High Performance Elastomer Seal for InstrumentationGallagher recently released our High Performance Elastomer Seals for the Instrumentation Industry White Paper.  This was written by Russ Schnell, an Elastomer Consultant contracted by Gallagher Fluid Seals, and a former Senior Application Engineer with the Kalrez® perfluoroelastomer parts business at DuPont.  This white paper is now available for download on our Resources page.

Below is the first section of the white paper, diving into applications where the measurement is made at the process and the results then transmitted to a control system.  This section will review the four types of in-line measurement devices, all involving slightly different elastomer sealing applications.

In-Line Process Applications

Flowmeters

Flowmeter - Elastomer Seal for InstrumentationFlowmeters are used to measure the flow of liquid. In this section we will only consider the measurement of liquid flow in a closed piping system. Several examples of flow measurement devices include: flowmeters, Venturi tubes and orifice plates.

Note that these devices are “in-line” and require isolating the process line to remove and repair, or replace the measurement device. Shutting down a process to remove a device is time consuming, involves loss of production, and may require specific procedures to protect the operators and environment when a line is opened. All of these devices require seals to prevent leakage of the process to the environment and the elastomer seals should last the life of the flowmeter. For aggressive chemicals or high temperature applications, FKM or FFKM seals are an excellent choice. These products offer a long service life and resist deterioration in harsh environments.

Continue reading Elastomer Seals for Instrumentation: In-Line Process

NEW White Paper! Elastomer Seals for Instrumentation

Instrumentation - High Performance SealsGallagher recently released our High Performance Elastomer Seals for the Instrumentation Industry White Paper, available for download on our site.  This was written by Russ Schnell, an Elastomer Consultant contracted by Gallagher Fluid Seals, and a former Senior Application Engineer with the Kalrez® perfluoroelastomer parts business at DuPont.  This white paper is now available for download on our Resources page.

Introduction

The term instrumentation covers a wide variety of applications. In the broadest sense, instrumentation may be considered as any equipment used for measurements. This equipment may be in a process stream and include devices such as flowmeters, pressure gages, and inline probes. Data from these devices are used for process control. In automobiles, sensors are used for a variety of applications including measuring the exhaust stream to “tune” the engine to yield maximum performance. Analytical laboratory instruments such as chromatographs and flame ionization detectors are used to determine the composition of samples. Instruments are used in the medical industry for product analysis as well as analysis of blood and urine samples. Of course this is only a partial list of the many applications involving instruments.

Continue reading NEW White Paper! Elastomer Seals for Instrumentation