gasket installation
- June 02, 2023
GYLON EPIX™
GYLON EPIX™ is a newly developed family of PTFE gaskets. It is manufactured using a patented, profiled surface based on Garlock's proven Fawn, Off-White, and Blue GYLON® to create highly conformable materials for optimum sealing performance.
GYLON EPIX™ provides superior functional performance by combining the traditional attributes of GYLON® with an innovative surface design. It offers a broader range of applications than traditional PTFE gaskets that are used in worn and pitted flanges. In addition, this evolutionary material
- October 11, 2022
Rare and Ultra-Pure Resources Present Unique Challenge to Finding Appropriate Low Temp Gasket
Modern technology often requires rare or ultra-pure materials that can only be handled or obtained within extreme environmental conditions. These same conditions present unique and hazardous difficulties when transporting or utilizing these resources. Resources such as liquid oxygen, nitrogen, or argon; all of which are classified as “industrial gases” are handled well below the normal temperature ranges that every-day liquids exist; ranging as low as -195.8°C (-320.4°F). This often makes it a challenging task to find a low temp gasket to fit the specifications for the application.
As an example, let’s look at argon; an important gas used in Welding, Neon Lights, 3D Printing, and Metal Production, just to name a few. It is far more economical to house and transport argon in its liquid state. However, it must be held at an astonishingly low -185.9°C. Fitting the pipes together and maintaining
- August 15, 2017
Brought to you by Thermoseal®
This blog provides guidance to maintenance operators, engineers and fitters to ensure successful gasket installation and assembly of bolted flange connections. However always check plant-approved installation procedures first.
The successful operation of a gasket depends upon a multiplicity of factors including the style and quality of the gasket material, but also the medium being sealed, the flange design, the amount of pressure applied to the gasket by the bolts and how the gasket is assembled onto the flanges and tightened. Very basic causes often lead to leakage in bolted joints, and in most cases, it is not just the gasket but also the human element. Users should evaluate all conditions to validate the products are suitable for the intended process.
Tools Needed
Specific tools are required for cleaning the flange and tensioning the bolts. Always use standard safety equipment and follow good safety practices. The following tools are required for removal of the old gasket and installation of the new gasket:
- Calibrated torque wrench or hydraulic tensioner
- Brass wire brush
- Personal safety equipment
- Lubricants for the bolts (if specified)
- Other plant-specified equipment