Freudenberg Sealing Technologies has launched series production of a modular sealing unit that combines a classic radial shaft seal with a plastic outer case. The design promotes better long-term seal performance and longevity, is easier to assemble, and significantly lowers manufacturing costs in comparison with traditional metal-encased radial shaft seal units. Freudenberg has developed the innovative sealing concept for use in general industry applications that are especially focused on small, electric household appliances.
Whether it’s to knead bread dough, mix a cake batter, puree soup ingredients or blend a smoothie, most people reach for an electric kitchen appliance to get the job done. The durability of the appliance depends largely on how well the seal at the outlet point of the drive shaft protects the interior from ingress of food residue or liquids. Seals made of high-quality elastomers or the polymer polytetrafluoroethylene (PTFE) combine low wear with excellent long-term resistance against leakage. In the past, a metal case was the best option available to maintain the integrity of the seal’s performance over a long period of time. Freudenberg Sealing Technologies has now succeeded in developing a modular sealing concept with a plastic case that meets the specific requirements for long-term performance as well as those made of metal. There are three major advantages to the new design: Significantly, in the price-sensitive, small appliance industry, the lower production costs associated with forming enclosures from plastic is an important consideration. In addition, Freudenberg's modular sealing unit concept accommodates the integration of additional components, such as shaft bearings. Finally, because small appliance housings are typically made from plastic, fastening the seal case to the appliance housing is easier to achieve.
The term “plastics” is generic way of describing a synthetic material made from a wide range of organic polymers. Organic polymers describes a man-made substance that is formulated using polymer chains to create what we commonly refer to as…(you guessed it), plastics.
Before plastic, leather had been used to create Backup ring devices behind O-rings. Leather allows fluids to be retained, providing lubrication for the O-ring when the system was running dry.
The problem with leather was that it could become dry and shrink away from the sealing service, exposing the elastomer to same pressure it was intended to protect against.
With the advent of polymers, a piece of plastic could be cut or formed into the exact shape to allow for zero extrusion gap, and for continued protection for the O-ring.
Some polymers were very brittle. Since they needed to be deformed to allow for installation into solid glands, the cut of the plastic could nibble at the O-ring, causing premature failure of the element it was supposed to be protecting.
When PTFE moved out of the lab and into industrial use, it quickly found itself adjacent to the O-ring. PTFE offers extrusion resistance and, at the same time, doesn’t erode or nibble at the O-ring due to the “softness” of the polymer.(Hardness between 55 and 65 Shore D)
Given the composition of PTFE, or Teflon, it could be utilized as a sealing element to protect Backup rings and conform to the shaft. The bonus was it was generally easy on shafts (depending on the filler added to the PTFE).
There are some negative aspects to Teflon that needed to be overcome by early engineers. First, it has a fairly high rate of Thermal expansion which, by its own nature, could often times lose contact with the sealing surface. This meant some kind of loading was necessary to ensure contact.
PTFE is as tough as other polymers, so the fact that it could seal on a shaft made it vulnerable during installation for tears or nicks on sealing surface.
Second, if it were stretched during installation, the material had to be sized back to its original shape due to its poor elastic properties.
Bacteria accumulation can ruin product and put consumer health at risk.
Bacteria accumulation is a serious issue in the food manufacturing industry - it can ruin product and put consumer health at risk.
While many know that Polytetrafluoroethylene (PTFE) is an excellent choice for use in diaphragms and gaskets, most do not realize that there exist varying grades of PTFE. Some lower cost PTFE offerings may contain an excessive volume of pores within their structure which can harbor organic contaminants such as bacteria.
To address this problem, a calendared manufacturing process is used. Calendared PTFE is a premium grade PTFE designed for use in aseptic applications requiring ultra-high purity standards. It is ideal for use in food, pharmaceuticals and a variety of clean markets.
Distinguished by an extremely low void content, calendared PTFE resists permeation and the accumulation of foreign matter, reducing the risk of harboring unwanted bacteria or residual media.
To achieve this, the unique manufacturing process orients the chains of PTFE in a lattice-like structure that reduces voids in the material and provides it with biaxial strength. This unique structure also delivers a very high flex life. When tested in an MIT Folding Endurance Tester, the flex life of calendared PTFE is four-times greater than conventional PTFE materials.
Unlike the skived process that is commonly used for PTFE manufacturing, the calendaring process produces uniform sheets of material with consistent physical properties. This gives calendared PTFE a renowned reputation for predictable performance and quality. The opposite is true for skived PTFE where variable properties lead to varying performance and reliability.
Better known as Teflon in the industry, Polytetrafluoroethylene is widely used in practically every industry on and off the planet (and even beneath its surface!)
This material’s primary claim to fame is its resistance to most chemicals. It inherently has an extremely low coefficient of friction, it’s easily machined from rods, tubes, or compression-molded shapes.
It’s one of the few polymers that are approved for medical implants due to its inertness to bodily fluids — the immune system principally ignores its presence in the body.
Moving away from the body, you’ll find PTFE or Teflon products in medical
The search for the ideal Polytetrafluoroethylene (PTFE) gasket has been elusive. Competing applications and workplace variables have led to the creation of myriad solutions, yet none that has proven fully adaptable and appropriate for universal adoption.
Garlock Sealing Technologies considered this to be a critical yet entirely solvable shortcoming. And it is against this backdrop that in 2016, they set out to compile a comprehensive list of attributes for the ideal PTFE gasket — a wish list, as it were — in order to build a better gasket.
Working with a third-party survey development company, Garlock developed an exhaustive questionnaire that probed every aspect and functionality of PTFE gaskets, testing and adjusting the questions until they had a workable, finalized version.
Using this final questionnaire, Garlock conducted extensive interviews at 15 major chemical processor companies, speaking with 20 engineers responsible for process operations, projects, maintenance and reliability. The goal was simple: to discover the ideal characteristics and their relative importance that engineers sought in a PTFE gasket.
After several months of data collection, Garlock analyzed the feedback and noted the most popular responses:
From those answers, Garlock drew the following conclusions, representing the most desirable and essential PTFE gasket characteristics:
Garlock used this feedback in developing a next generation PTFE gasket — GYLON EPIX. Featuring a hexagonal surface profile, GYLON EPIX offers superior compressibility and sealing for use in chemical processing environments. Its enhanced surface profile performs as well or better than existing 1/16″ or 1/8″ gaskets, allowing end-users and distributors to consolidate inventory, lower the risk of using incorrect gasket thicknesses and reduce stocking costs.
GYLON EPIX checks off the most desirable gasket attributes:
GYLON EPIX with its raised, hexagonal profile allows it to perform the job of both traditional 1/16” and 1/8” gaskets. It accomplishes this by combining the bolt retention of the former with the forgiveness for bad flange conditions of the latter, a truly innovative feature for PTFE sheet gasketing.
Polymer wear rings were developed to offer an alternative to dissimilar metal wear rings.
One of the advantages to using a polymer material such as nylon or filled-Teflon instead of a metallic bearing . Whereas when you use bronze or metallic bushings, these materials are prone to point loading on the edges of the bearing.
This property of polymer bearings combined with solid lubricants can yield a product that is much less likely to damage moving components.
When it comes to designing and developing seals, the aerospace and industrial industries need a basis to allow production anywhere in the world.
One of the first PTFE (Teflon) standards, AMS3678, describes Teflon and the addition of fillers. This was used in conjunction with Mil-R-8791, which is one of the Mil specs describing a backup ring device.
The origin of all these specs dates back to the creation of the O-ring.
In 1939, Niels A. Christensen was granted a U.S. Patent for “new and useful improvements in packings and the like for power cylinders.” These referred to improved packing rings made of “solid rubber or rubber composition very dense and yet possessive of great liveliness and compressibility.” These products were suitable for use as packings for fluid medium pistons (liquid or air). The improved packing ring is the modern O-ring.
There was a progression of standards for the O-rings created by individual countries, such as AS568, BS 1806, DIN 3771, JIS B2401, NF T47-501, and SMS 1586. Eventually, AS568 became more accepted in the industry.
The backup ring was originally created to help improve the O-ring’s ability to resist extrusion. Teflon was widely used as one of the materials for backup ring devices. Standards were created to unify the production of this Teflon device.
The progression of standard changes has led to AMS3678/1 for Virgin PTFE through AMS3678/16. These standards describe a group of Virgin- and filled-PTFE materials accepted by the industry for manufacturing seals and back-up ring devices.
Mil-R-8791 was canceled in February 1982. This spec was superseded with AS8791, which eventually evolved into AMS3678.
AMS3678 is a tool used by customers and Teflon suppliers to create uniformity in the manufacturing and processing of seal and bearing materials. The standard is inclusive of most of the compounds upon which the industry was built.
When customers approach with an old “mil spec”, they are pushed to the new AMS spec which is currently active. Eclipse manufactures to the spec so their customers will have the confidence that they manufacture to a known standard.
When crossing custom materials from well-known sources, customers are driven to an accepted spec that is equivalent to the original source of the material. This helps customers sell their products with internationally-known materials rather than custom, home-grown compounds that are often intended to single source those materials.
There are several qualifications of the spec that suppliers must observe. This includes dimensional stability tests. This test ensures the material has been properly annealed, and that the seal or backup ring will fit and function as it was originally intended.
Eclipse is uniquely qualified to supply parts to the latest AMS3678 specification. They understand the scope of the specification which allows us to ship parts with fully traceable certification.
AMS3678 helps validate a material to a customer to ensure they get the same material processed the same way with each order. Beyond this, there are other ways to determine what makes a part process-capable.
During the June 17-23 event in Paris, Freudenberg showcased a new high temperature, fireproof material; an Omegat OMS-CS cap seal; and new ethylene propylene diene monomer (EPDM) and a fluoroelastomer (FKM) developmental material.
“Our aerospace customers strive continuously to be faster, safer and more efficient, which in turn requires us to innovate to help them reach those goals – a challenge we enthusiastically embrace,” said Vinay Nilkanth, vice president, Global Mobility Sector, Freudenberg Sealing Technologies. “The launch of several new products aimed at improved performance underscores Freudenberg’s commitment to being a global
At Eclipse, it’s an engineer’s job to understand and weigh these limitations with the goals of the application. For example, when a customer needs an extremely low friction seal that also has very high sealability, there’s always a compromise that needs to happen.
A magical seal material that has the pliability and excellent seal characteristics of rubber, and the low-friction, high-wear resistance and temperature range of PTFE simply doesn’t
Article re-posted with permission from Parker Hannifin Sealing & Shielding Team.
Original content can be found on Parker’s Website and was written by Nathan Wells, Application Engineer, Parker Engineered Polymer Systems Division.
My grandpa used to have a rusty, old air compressor in his shop. As a child, when my siblings and I would visit him, he’d use it to power air wrenches, grinders, and inflate flat soccer balls for us. I noticed it had a port labeled “ADD OIL DAILY” that was covered in the same thick layer of greasy dust as all the other unused junk in his shop. Knowing my grandpa, if asked about adding oil he probably would have said, “Oil is expensive. That’s how the companies get ya!” The compressor’s seals leaked so badly, you could hear the hissing even over the loud motor. I was certain one day it would explode.
Pneumatic tools are common in factories, tool shops, and DIY garages around the world. Using compressed air for power is convenient, simple, and — when maintained properly — safe and efficient. However, air treatment costs can add up fast. Traditional rubber seals used in air tools require clean, low moisture, compressed air with the proper amount of lubrication added. Good Filter/Regulator/Lubricator systems (FRLs) cost as much as the tools themselves! So, what would happen if we didn’t have to provide pristine air?
Today we have the technology to create seals for tools which don’t require daily or even yearly upkeep. You’ll find these tools labeled “maintenance-free,” which sounds great to the guy responsible for maintenance. It sounds even better to the guy paying for maintenance … and to engineers designing tools who want to keep warranty costs down.
Early pressure seals were made out of leather. My grandpa’s compressor probably wasn’t that old, but even since his time, we’ve come a long way.
When I’m asked for seal recommendations in totally dry-running applications, my mind clicks to a material called PTFE (chemical name polytretrafluoroethylene). Most people know PTFE by the brand name Teflon® and are familiar with its use when applied to cookware as a high temperature, slippery, non-stick coating.
PTFE is a semi-hard plastic which feels slick to the touch thanks to its low friction properties. It’s considered self-lubricating because it leaves micro deposits on the sealing surface and reduces friction after just a few strokes. Because of this, it’s good for high-speed sealing and can operate completely dry.
By adding fillers to PTFE, seal manufacturers can tailor materials for greater suitability in meeting performance requirements for a wide range of conditions. String-like additives including fiberglass and carbon fiber increase pressure rating, wear resistance and seal life. Dry lubricant-type additives such as graphite or molybdenum disulfide (MoS2) further increase a seal’s ability to run without lubrication, and at higher speeds and pressures. In pneumatic medical, pharmaceutical, and food processing systems, clean grade mineral-based strengtheners may be used as additives.
PTFE seals for dry running equipment are available in several profile configurations: