seal retention

Article re-posted with permission from Parker Hannifin Sealing & Shielding Team.
Original content can be found on Parker’s Blog.

We receive many requests from customers asking for recommendations on how to retain seals in an application. One of the most popular "quick fixes" is to apply liberal amounts of adhesive to a standard O-ring type product without respect to groove shape or sealing function. However, Parker OES provides a wide array of sealing technologies, offering innovative solutions to accommodate the challenging and vast sealing needs of our customers.

Replacing RTV with Pre-Applied PSA

A customer had been using a standard O-ring product on an outdoor electronic device. This part was sealing the external edge of the enclosure and meant to keep out water and dust. The enclosure was plastic injection molded so this extreme edge had irregular geometry to accommodate the molding process. The original proposal was to shove O-ring cord in place and adhere it down with RTV (Room Temperature Vulcanization) so that it did not fall out during assembly. This left a rust colored stripe exposed on a  consumer device due to fitment issues. Parker’s proposal was to replace the O-ring cord with a custom hollow extrusion that fit the available space and allowed complete closure, thus not exposing the seal to be visible. The RTV process was replaced with PSA (Pressure Sensitive Adhesive) that was preassembled to the seal and allowed for quick and clean placement during assembly and retention for any maintenance needed.