Comparing Conventional Elastomers to DuPont™ Kalrez® FFKM
Today, we continue our series on the world’s most popular perfluoroelastomer, Kalrez.
The agenda for part two of our video series on FFKM will compare conventional elastomers vs. Kalrez®. We will take a deep dive into what makes Kalrez so special for a wide variety of industries and applications worldwide.
Conventional elastomers come in many different types and grades. For instance, there are approximately 60 different grades of Viton™, a fluoroelastomer, and 18 grades of NORDEL™, an EPDM.
To further complicate this situation, each o-ring manufacturer or rubber fabricator then has a number of specific custom formulations or compounds for each grade. This multiplier effect essentially creates hundreds of different compounds in these conventional commercial elastomers.
Since Kalrez® parts are predominately used in sealing systems, it is useful to review the basic properties of the most popular seal materials compared to the world's most well known FFKM, Kalrez®.
The full agenda can be seen below:
0:11 Agenda
0:25 Conventional elastomer overview
1:47 Nitrile/NBR/Buna-N overview
2:27 EPDM/EPR overview
3:14 Silicone/Fluorosilicone overview
4:35 Fluoroelastomer/FKM overview
5:09 Cross-linked systems in FKM
5:47 Kalrez & its benefits
6:44 Kalrez cross-linked structures
7:59 (Graph) Maximum service temperatures of common elastomers
8:25 (Graph) Volume swell in common elastomers
9:07 Kalrez vs conventional elastomers
Watch the introduction to Kalrez video
Additionally, you can shop for Kalrez here >>