Tag Archives: chemical

Considerations for Using Metal Hose in Chemical Plants

Chemical plants are one of the biggest industrial users of corrugated metal hose assemblies. Processes performed in the plants involve some of the most demanding environments:

  • Temperatures ranging from extreme heat to cryogenics
  • Mixing and transfer of hazardous compounds
  • Equipment configurations that result in less-than-ideal piping situations

Metal hose can handle all of these factors and has some other inherent benefits over other hose types when it comes to the kind of applications seen in chemical plants. Let’s dig into some of the main areas of consideration and concern when dealing with chemical hoses.

Metal Hose Handling Considerations

Mishandling of hoses is one of the main contributors to premature failure. Because chemical plants have so many different inputs and outputs, hoses are often used to facilitate the transfer of chemicals from trucks, trains, or barges to the plant and even within the plant from one unit to another. Chemical blending manifolds are a great example of this, where a single hose assembly may be used for various connections at different times depending on what operations the plant is performing.

Cam Coupling PictureThe need to easily connect and disconnect these hoses quickly and often makes cam and groove couplings a popular choice for chemical plants. When moving hoses from one outlet to another, it’s tempting for users to abuse the “arms” on the fitting and over-bend the hose or torque it into position. Always try and keep the hose as straight as possible, and avoid twisting it. Additionally, hoses are made to flex, but extremely tight bends (especially near the end fitting) can damage the hose and cause it to fail prematurely. Operators should keep this in mind to prevent deformation of the hose when making connections.

Metal Hose Attributes

There are several intrinsic features of metal hose assemblies that make them well-suited for chemical plant service. Chiefly among them is that they are not susceptible to permeation. This is a huge benefit for both operator safety, and plant safety. The metal core is puncture-resistant, and in the event of a leak, the hose will typically develop a small crack or pin-hole and does not burst apart.

Metal hoses also have a more compact end fitting configuration. Because end fittings are welded onto the end of the hose instead of a barbed or crimped mechanical attachment, they don’t take up as much of the hose’s flexible length. This results in more working live length compared to non-metallic assemblies, which further facilitates handling and easier installation by the operators. It also means that metal hose is easily customized without the need for adapters. Stainless steel fabrication techniques provide the ability to use a wide array of fitting configurations, and can be tailored to prevent media entrapment, resist end-pull, or to accommodate high system pressures.

Finally, one of the handling benefits of metal hose is its light weight. Calling metal hose lightweight might sound contradictory, but pound for pound, metal hoses generally offer higher working pressures than rubber or composite chemical transfer hoses. This gives metal hose a wide range of potential applications, and also translates into easier handling and installation by operators. Continue reading Considerations for Using Metal Hose in Chemical Plants