cip hydro

The sluice gate at Faraday Dam in Oregon operates fully submerged with approximately 40′ of head at the middle of the gate. The estimated operation pressure on each of the bushings is around 4,000psi (4ksi). The gate is used for water level control, therefore continuously makes small adjustments to its elevation.

The gate was removed in September 2014 to perform inspection of gate wheel assembly and bearings. It was determined that several of the wheels had either stopped working or fallen off due to corrosion and lack of lubrication. The remaining bearings were found to have excessive clearance due to wear. New stainless steel sleeves were fabricated by Portland Manufacturing and welded onto the gate wheel stub shafts. New composite greaseless bushings supplied by CIP were installed to replace the failed bearings.