Mechanical seals are perhaps one of the most underrated and unappreciated parts of pumps or machines. They ensure that pumps, for instance, do not leak, causing damage to the rest of the machine.

In general, mechanical seals contain the fluid within machines, like pumps and mixers, where a rotating shaft passes through a stationary housing. It prevents visible leaks from leaking. The thing is that machines do leak about ½ teaspoon of liquid each day. But this is normal as the machine captures the moisture and is condensed within it. It also has lightly loaded faces that consume less power. Moreover, the machines suffer from less corrosion because the product or liquid is contained within the pump.

There are different types of seals that machines use and these include stationary seal, rotating seal, balanced seal, unbalanced seal, and mounted seal. The most common seal is the rotating seal and it is used as a component that holds rotating springs together.

The quality of seals is crucial. It is also important to apply the correct seal for the appropriate function. But even if you have chosen the right seal, there will be moments wherein your seals are failing fast. This is especially true if you are working in a plant containing different industries. You have to take note that the mechanical seal serves as the lifeline of the machine. Thus, letting you understand the health of your machine. When the seals are failing, it indicates that your machine might also be failing. There are so many reasons why seals fail and understanding these reasons is crucial to protecting the seal and making it last for a long time. Below are the common reasons why seals get broken.

Letting the Pump or Machine Run Dry

Letting the pump run dry can damage the mechanical seal. Because the seals should not run dry, they are usually designed to allow a thin film of liquid that migrates across the seal faces. If the seals run dry, the friction can cause heat to build up eventually cause damage and leaks. In most cases, the mechanical seal undergoes thermal shock and can disintegrate within 30 seconds after friction and heat have been introduced to it.

Too Much Vibration

Machines do vibrate over time and this is caused by many factors like improper alignment and pump imbalance. It can also be caused by operating the pump beyond its best efficiency point. This means that the machine is operating beyond its normal working point. Machines normally make vibrations as they contain different moving components that produce movements resulting in vibrations. Vibrations can hurt the machine thus resulting in damaged components including reduced seal life.

Hammering Couplings

Machines contain components such as pistons that take on a hammering action. While it is necessary to move the machine, hammering can be very destructive not only for the machine but also for the seals. In some machines, the hammering is so intense that it produces a lot of movement and vibrations. While hammering is inherent among machines that are driven by the piston, it can cause a lot of problems to the seal.

Human Error

Human error can also cause the seals to fail. An example of human error that can lead to damage of seals is skipping initial start-up procedures. If the machine does not start properly, this causes the motor to trip and the shaft to twist. In turn causing movement that results to internal parts coming into contact. It can also lead to failure of the seal and reduce the bearing life. On another note, improperly installing the seal can cause damage to components such as the O-rings. Failure to clean the surrounding of the seals can also lead to failure. Proper maintenance should be given to the seal. The thing is that seals are very sensitive and they can get damaged with even the presence of oil, dirt, and even fingerprints.

Using the Wrong Mechanical Seal

There are different types of mechanical seals out there and it is important that the appropriate seal should be used for a particular machine. Unfortunately, even seasoned engineers lack the necessary information on which type of mechanical seal they should use with their machines. Choosing an inappropriate mechanical seal leads to errors during the installation process. Remember that different machines or pumps handle different kinds of products. You cannot, for instance, choose a seal to handle an abrasive and caustic liquid and expect it to not leak eventually.

If you want to improve the lifespan of your machine, it is important to reduce the mechanical seal failure. You can do this by selecting the right seal and also engaging in good operating practices. While seals look small and disposable, they are very reliable and they can function effectively if they are used and cared for properly.


For more information about mechanical seals, contact us today.

Looking for a cartridge seal? Shop our e-commerce store.

The original article can be found here.