Garlock products
- December 09, 2020
INDUSTRY
Food and Beverage
CUSTOMER
Food processing customer shredding zucchini for distribution to restaurants, schools and other food manufacturers.
BACKGROUND
The food processing customer has a zucchini shredder under heavy washdown. The shredder uses two bearings each costing
- September 11, 2020
Garlock Style 215 Helps Steel Products Manufacturer With Harsh Acids
Garlock Style 215 Expansion Joints are PTFE concentric spool-type flexible couplings that are designed to reduce noise and compensate for expansion, contraction, and minor piping misalignment in chemical processing, air conditioning, and heating systems.
The complete assembly includes a fluorocarbon resin PTFE body, electroless nickle-plated ductile iron flanges, polyethylene-covered restriction zinc plated bolts, and stainless steel corrosion-resistant reinforcing rings.
Case Study
INDUSTRY
Primary Metals
CUSTOMER
South American manufacturer of flat and long steel products
BACKGROUND
Construction of two new facilities including a hot rolling mill.
CHALLENGES FACED
The plant was in need of expansion joints that could handle chemicals on their pickling lines. Pickling is a metal surface treatment used to remove impurities, such as stains, inorganic contaminants, rust or scale from ferrous metals. A solution called pickle liquor, which contains strong acids, is used to remove the surface impurities. It is commonly used to clean steel in various steel making processes. The line required an expansion joint with a PTFE tube to handle the pickle liquor which included hydrochloric and sulfuric acid, but a very short overall length for installation.
- June 09, 2020
The Garlock Family of Companies has launched a new fully-coated isolation gasket known as EVOLUTION.
EVOLUTION® Isolation Gaskets
The next generation of isolation gaskets, EVOLUTION®, features easier installation, tight sealing, high-temperature operation, no permeation, hydrotesting isolation, fire-safety and chemical-resistance.
Featuring a thinner, 1/8-inch design, EVOLUTION minimizes the difficulties encountered when attempting to install thicker isolating gaskets. The full-coating encapsulation allows the gasket to be hydrotested and left in the pipeline with the same isolation properties as before it was tested.
EVOLUTION's coating is highly resistant to abrasion and impact while providing chemical resistance to hydrogen sulphide (H2S), steam, carbon monoxide, carbon dioxide and other chemicals often found in oil and gas pipelines. This fully encapsulated coating also prevents the need for expensive exotic cores, as it eliminates contact to exposed metal.
- April 24, 2020
How the raised surface profile of PTFE sheet gasket helped a midstream oil and gas processor address leaky pipes
Bolted flange-gasket connections in process piping systems are common and given little thought – unless they start to leak.
Chronic leakage proved to be an issue for one of Garlock's clients, a midstream oil and gas processor and services provider. The site processes, stores, and transports natural gas, liquefied natural gas and petroleum products. Garlock was brought in to provide a solution to the problem.
Successful connections are dependent on a variety of things, including the state of the flange surfaces, alignment, bolt and nut grade and strength, bolt and nut thread condition, lubrication, bolt tightening process, service conditions, and choice of gasket.
When a flange-gasket joint is assembled, the gasket must first be compressed to fill the gaps between the flange surfaces, creating a seal when system pressure is applied. Secondly, it must maintain that seal as the system is brought on-line and temperature and pressure escalate.
As the temperature increases, a gasket made of non-metallic materials such as rubber, fibre, PTFE and inorganic fillers is prone to lose thickness, that is, creep. And the thicker the gasket is, the
more it is prone to creep (1/8-inch thick gaskets creep more than 1/16-inch).The two most important performance qualities of a gasket are its ability to seal and its ability maintain that seal. These can be indicated by industry standard tests for sealability and creep.
On the surface, this particular case study would seem to be an application of little complexity. However, the details of the joint gave rise to several issues that caused the user chronic leakage problems. Here are the service conditions and background of this particular case:
- Temperature: 100°F to 120°F (38°C to 49°C)
- Flanges and use: 18-inch Class 150 raised face flanges used in the pipe systems of cooling tower water pumps. Multiple gaskets are on either side of spool piece
- Media: Water
- Pressure: 100 psig to 150 psig (7 bar-g to 10.3 bar-g)
- March 27, 2020
Facility Issue:
In a brine concentrator, an original competitor’s expansion joint failed upon start up.
Industry:
Water Treatment
Background of the Facility:
This facility is a Zero Liquid Discharge (ZLD) power plant. Water is initially pumped from a well, pre-treated, used as process water, then reclaimed and retreated with a Brine Concentrator for use in their cooling towers. No city water is used and no waste water is disposed of from the site.
Brine concentrators use thermal energy to evaporate water, which is subsequently condensed and discharged as clean distilled water.
Brine Concentrators are also used in water treatment facilities in desalination plants, mining operations and well drilling operations in the oil & gas industry.
- Size: 24 “x 10” FF
- Temperature: 221° F
- Media: Brine Slurry
- Pressure: 30 psi
Observation:
The original expansion
- February 28, 2020
GYLON EPIX® is a family of gaskets that effectively seals a broader range of applications and is more forgiving during the installation process. It allows the end user to save valuable turn-around time, reduce re-work, and lower costs, helping them to finish ahead of schedule and under budget.
GYLON EPIX® features a hexagonal surface profile that provides the torque retention and blowout resistance of a thin gasket and the conformability of a thicker gasket. GYLON EPIX Style 3504 is a high performance, aluminosilicate microsphere filled PTFE sheet material designed for use in moderate concentrations of acids, and caustics, as well as hydrocarbons, refrigerants, and more.
INDUSTRY
Chemical
CUSTOMER
Chemical Manufacturer and Distributor
BACKGROUND
Loading stations are very critical in the chemical industry as flanges are disassembled and reassembled everyday.
CHALLENGES
- January 21, 2020
Garlock Style 204 Rubber Expansion Joint
The Style 204 family of spool-type expansion joints are manufactured with the industry standard narrow arch design. This style is intended to be used in dynamic conditions where both pressure and vacuum concerns are present.
Features and Benefits
- Fully laboratory and field tested for long life and exceptional reliability
- High pressure and vacuum resistance offer increased safety and ensure suitability for a wide range of applications
- Single and multi-arch designs are available for a range of movement capabilities
- Concentric and eccentric reducing configurations can be provided to join piping of unequal diameters
- January 08, 2020
Bacteria accumulation can ruin product and put consumer health at risk.
Bacteria accumulation is a serious issue in the food manufacturing industry - it can ruin product and put consumer health at risk.
While many know that Polytetrafluoroethylene (PTFE) is an excellent choice for use in diaphragms and gaskets, most do not realize that there exist varying grades of PTFE. Some lower cost PTFE offerings may contain an excessive volume of pores within their structure which can harbor organic contaminants such as bacteria.
To address this problem, a calendared manufacturing process is used. Calendared PTFE is a premium grade PTFE designed for use in aseptic applications requiring ultra-high purity standards. It is ideal for use in food, pharmaceuticals and a variety of clean markets.
Distinguished by an extremely low void content, calendared PTFE resists permeation and the accumulation of foreign matter, reducing the risk of harboring unwanted bacteria or residual media.
To achieve this, the unique manufacturing process orients the chains of PTFE in a lattice-like structure that reduces voids in the material and provides it with biaxial strength. This unique structure also delivers a very high flex life. When tested in an MIT Folding Endurance Tester, the flex life of calendared PTFE is four-times greater than conventional PTFE materials.
Unlike the skived process that is commonly used for PTFE manufacturing, the calendaring process produces uniform sheets of material with consistent physical properties. This gives calendared PTFE a renowned reputation for predictable performance and quality. The opposite is true for skived PTFE where variable properties lead to varying performance and reliability.
- December 13, 2019
Gylon Epix's patterned material provides enhanced compressibility for better sealing
Gaskets are ubiquitous components in a processing plant. Every flange, equipment joint and connection point will have some form of gasket to prevent fluids from compromising (i.e., leaking from) a process system. However, effective sealing can pose challenges. A new form of polytetrafluoroethylene (PTFE) gasket, Gylon Epix, already has successfully addressed a number of persistent problems at plants.
The gasket, which is available in 3⁄32-in.-thick, 60-in. × 60-in. sheets, features a raised hexagonal pattern (Figure 1). It exhibits
- September 10, 2019
The search for the ideal Polytetrafluoroethylene (PTFE) gasket has been elusive. Competing applications and workplace variables have led to the creation of myriad solutions, yet none that has proven fully adaptable and appropriate for universal adoption.
Garlock Sealing Technologies considered this to be a critical yet entirely solvable shortcoming. And it is against this backdrop that in 2016, they set out to compile a comprehensive list of attributes for the ideal PTFE gasket — a wish list, as it were — in order to build a better gasket.
Working with a third-party survey development company, Garlock developed an exhaustive questionnaire that probed every aspect and functionality of PTFE gaskets, testing and adjusting the questions until they had a workable, finalized version.
Using this final questionnaire, Garlock conducted extensive interviews at 15 major chemical processor companies, speaking with 20 engineers responsible for process operations, projects, maintenance and reliability. The goal was simple: to discover the ideal characteristics and their relative importance that engineers sought in a PTFE gasket.
After several months of data collection, Garlock analyzed the feedback and noted the most popular responses:
- 28% of respondents said that they struggled with how different gaskets required different compressive loads and how to ensure that those gaskets had been installed properly
- 21% expressed frustration with the creep properties of PTFE gaskets
- 21% desired a gasket that seals with less compressive load
- 14% expressed frustration at the installation inconsistencies of their fitters
- 14% expressed frustration with leaking, especially after a successful installation and start-up
From those answers, Garlock drew the following conclusions, representing the most desirable and essential PTFE gasket characteristics:
- Seal: Seals easily
- Installation and assembly: Forgiving of poor installation or assembly practices
- Forgiving: Forgiving of poor flange conditions
- Retention: Maintains a seal after installation
- Flexible: Can be used in a broad range of services to avoid user confusion and reduce inventory
Introducing: GYLON EPIX
Garlock used this feedback in developing a next generation PTFE gasket — GYLON EPIX. Featuring a hexagonal surface profile, GYLON EPIX offers superior compressibility and sealing for use in chemical processing environments. Its enhanced surface profile performs as well or better than existing 1/16″ or 1/8″ gaskets, allowing end-users and distributors to consolidate inventory, lower the risk of using incorrect gasket thicknesses and reduce stocking costs.
GYLON EPIX checks off the most desirable gasket attributes:
- Installation and assembly: Even distribution of the bolt load over the contacted area of the gasket during the assembly process
- Retention: Retention of the bolt load administered at assembly
- Seal: Efficient translation of bolt load to sealing performance
- Forgiving: The ability to perform in imperfect flanges and installation conditions
GYLON EPIX with its raised, hexagonal profile allows it to perform the job of both traditional 1/16” and 1/8” gaskets. It accomplishes this by combining the bolt retention of the former with the forgiveness for bad flange conditions of the latter, a truly innovative feature for PTFE sheet gasketing.